192004492 - 1084B16 ENGINE OIL PUMP - R+R VEHICLES WITH A/C

Removing ( Refitting )     Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.    Op. 5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONOMG    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 1032C19 MOVING TIMING BELT TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING    Op. 1032C31 FIXED TIMING TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED1. Position the crossmember (1a) for supporting the power unit fitted with special support buffers (1b) and secure the power unit as illustrated in the diagram using the special hook.
DescriptionCodeFunction
1aCrossmember1.860.851.003Power unit support
DescriptionCodeFunction
1bSupport buffers1.870.650.000Power unit support
Remove the hydraulic arm lift positioned previously for removing the timing belt.1. Disconnect the electrical connection for the air conditioning compressor engagement electromagnet.
DescriptionConnector
1Air conditioning compressor engagement electro-magnetL020
2. Undo the air conditioning compressor fixing bolts.
1. Secure the air conditioning compressor to the crossmember taking great care not to damage the system pipes.
Position a suitable container for collecting the engine coolant.1. Open the fastening band (1a) and disconnect the coolant supply pipe (1b) to the pump.2. Undo the bolts fixing the rigid coolant supply pipe to the pump.
    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1020A26 CRANKCASE SUMP - R.R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLES WITH AIR CONDITIONING1. Undo the bolts fixing the oil pump.
1. Remove the oil seal front cover complete with oil pump, water pump and gasket.
Separate the water pump at the bench. Refitting ( Removing ) Fit the water pump at the bench.1. Fit the oil seal front cover complete with oil pump, water pump and gasket.
1. Tighten the oil pump retaining bolts to torque.
Value daNmFasteningComponentØ  
12.0BoltOil pump-
    Op. 1020A26 CRANKCASE SUMP - R.R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLES WITH AIR CONDITIONING    Op. 1084A16 OIL DIPSTICK PIPE - R.R1. Connect the coolant supply pipe (1a) to the pump and renew the fastening band (1b).2. Tighten the bolts fixing the rigid coolant supply pipe to the pump.
1. Connect the electrical connection for the air conditioning compressor engagement electromagnet.
DescriptionConnector
1Air conditioning compressor engagement electro-magnetL020
2. Tighten the air conditioning compressor fixing bolts to torque.
Value daNmFasteningComponentØ  
12.0BoltAir conditioning-
Position the hydraulic arm lift removed previously underneath the engine oil sump.1. Remove the crossmember (1a) for supporting the power unit fitted with special support buffers (1b).
DescriptionCodeFunction
1aCrossmember1.860.851.003Power unit support
DescriptionCodeFunction
1bSupport buffers1.870.650.000Power unit support
    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED    Op. 1032C31 FIXED TIMING TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING    Op. 1032C19 MOVING TIMING BELT TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONOMG    Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R.    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 0010T21 ENGINE COOLANT - CHECK DENSITY AND CHANGE, IF NECESSARY