3362596 - 1056B14 THROTTLE CASE - R + R

Removing ( Refitting ) Disconnect the negative battery terminal.    Op. 1048A69 RIGID PIPE BETWEEN AIR FILTER AND THROTTLE CASING WITH BUILT IN RESONATOR - R.R1. Disconnect the electrical connection for the throttle casing actuator.
DescriptionConnector
1Integrated throttle casing actuatorN075
2. Adjust the rapid connector and disconnect the oil vapour recovery pipe from the throttle casing.3. Open the two fastening bands (3a) and disconnect the two pipes (3b) from the throttle casing.4. Undo the bolts securing the throttle body.
1. Remove the throttle body.
Refitting ( Removing ) 1. Place the throttle casing in position.
1. Tighten the bolts securing the throttle body.2. Connect the two coolant pipes (2a) and renew the two fastening bands (2b).3. Connect the oil vapour recovery pipe to the throttle casing.4. Connect the electrical connection for the throttle casing actuator.
DescriptionConnector
4Integrated throttle casing actuatorN075
    Op. 1048A69 RIGID PIPE BETWEEN AIR FILTER AND THROTTLE CASING WITH BUILT IN RESONATOR - R.R- Connect the negative battery terminal.