3363558 - 1020A24 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION WITH ENGINE OR INTERFERING COMPONENTS REMOVED

Removing ( Refitting ) 1. Undo the retaining bolts.2. Using the tool (2a) cut the bead of sealant and remove the oil ump (2b).
DescriptionCodeFunction
2aBlade1.870.718.000Cut sealant
Refitting ( Removing ) Using a suitable tool, reface the thread for the seats for the oil sump fixing bolts.Apply a bead of silicon sealant paste about 2 mm thick to the contact areas between the engine block, 5th main bearing cap (flywheel side) and the oil pump module.1. Apply a bead of silicon sealant paste about 3 mm thick to the edge of the sump and around the oil recirculation and inlet connectors.
1. Fit the oil sump in place.2. Apply thread-locking agent to the fixing bolts and tighten them to the recommended torque.
Value daNmFasteningComponentØ  
21Bolt--