I03 NUMBER PLATE LIGHT NOT WORKING - Fiat - STILO - eLearn

3360226 - I03 NUMBER PLATE LIGHT NOT WORKING

The number plate lights are turned on separately (RH and LH) from the Body Computer Node when a Side Light on or Parking light on (four lights) signal is received

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the Examiner to the tester input and check the body computer for: faults	Continue to Step 3	Number plate light short-circuited or with circuit openA.	Continue to Step 2
2	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Check the condition of the bulbs or bulb affected RH or LH Check the continuity and the insulation of the wires between the Body Computer connections and the number plate light connector or affected wiring RH or LH. Check the continuity and the efficiency of the number plate light earth Check the condition of the number plate light internal circuit See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Continue to Step 3	Bulbs faulty	Change the bulbs or bulb
			Connection between body computer and number plate light connector with o.c. or s.c.	Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
			Earth broken or inefficient	Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
			Circuit with o.c. or s.c.	Change light Op. 5550D24
3	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the diagnostic equipment connected, check number plate light bulb operation by mean of active diagnosis:	Continue to Step 4	No light comes on	Replace the Body Computer Op. 5505A32
4	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'