I36 TURN SIGNAL FRONT (ONE) RH OR LH NOT WORKING - Fiat - STILO - eLearn

The turn signals are controlled and tested (light check function) directly by the body computer node.

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the tester to the tester input and check the body node for: faults in the turn signals check turn signal operation via active diagnosis	Continue to Step 5	turn signal anomaly	Continue as instructed by the tester
		Continue to Step 5	Bulb does not come on	Continue to Step 2
2	CHECKING TURN SIGNAL CONDITION	All OK	Problems met	Operation
	Check the condition of the turn signal bulb	Continue to Step 3	Bulb blown	Change bulb Op. 5550C18
3	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Checking light earth See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Continue to Step 4	Earth broken	Restore the connection See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
4	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Check the continuity of the wiring between front headlamp and body computer node. See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Continue to Step 5	Wiring broken	Renew the electrical connections See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
5	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Replace the Body Computer Op. 5505A32Search for the fault starting from another symptom'