| | Results of the tests |
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|
| Check
that the electrical connector on the two-way pump for windscreen
and rear window washer and the electrical connector on the windscreen
wiper motor are properly inserted. | Continue to Step 1 | Electrical connectors
not fitted properly. | Connect the electrical connectors, making sure
they are properly fitted into their seats. |
| 1 | FUSE CHECK | All OK | Problems met | Operation |
|---|
| Check
the condition of the windscreen wiper supply fuse | Continue to Step 2 | Fuse blown | Change the windscreen wiper
motor supply fuse |
| 2 | CHECKING RELAY | All OK | Problems met | Operation |
|---|
| Check
operation of the windscreen wiper motor supply control relay | Continue to Step 3 | Relay faulty | Change the windscreen wiper
motor supply control relay |
| 3 | CHECKING STEERING COLUMN SWITCH
UNIT | All
OK | Problems
met | Operation |
|---|
| Check
the stalk unit is properly supplied See E3020 WINDSCREEN WASH/WIPE | Continue to Step 4 | Stalk unit not properly supplied:
electrical connection between body computer Node and stalk unit broken
or not insulated. | Restore connection/insulation of electrical connection
between body computer node and stalk unit See E3020 WINDSCREEN WASH/WIPE |
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | The fault persists | Change stalk unit Op. 5550A10Search
for the fault starting from another symptom' |