3360267 - K05 MILOMETER NOT WORKING

The milometer either does not work or does not work properly whilst driving. the speedometer works properly. Even the speedometer also does not work properly, see  See table K03  SPEEDOMETER NOT WORKING;
The milometer signal is supplied by the 'body computer node' using the signals coming from the 'brakes node'.
Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation

Check that with the engine started up:

  • no failure message is displayed
Continue to Step 2There are faultsContinue to Step 1
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner) to the Body Computer.

Check the CAN network information:

  • control units inactive
  • control unit errors
  • control units with errors in CAN line
Continue to Step 2Presence of faults in the CAN networkContinue according to the instructions for the diagnostic equipment
Presence of errors at instrument panel nodeContinue to Step 2
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the diagnostic equipment (Examiner) to the diagnostic socket or keep it connected and check:

  • that there are no faults at the instrument panel node
Continue to Step 3Presence of errors or failed dialogue with the diagnostic equipmentContinue following the instructions for the diagnostic equipment
3CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Keeping the diagnostic equipment (Examiner) connected to the diagsnostic socket, check:

  • that the pointer is working via active diagnosis
Continue to Step 4Milometer not workingReplace instrument panel Op. 5560B11
4CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentThe fault persistsSearch for the fault starting from another symptom'