3360271 - K21 FUEL RESERVE WARNING LIGHT NOT WORKING
With the ignition ON, the fuel reserve warning light in the instrument panel does not come on when the tank is empty; | the warning light on message is sent by the 'body computer node' to the 'instrument panel node' via the B-CAN network. |
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check:
| Continue to Step 2 | The warning light does not come on | Replace instrument panel Op. 5560B11 | |
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Replace the Body Computer Op. 5505A32Search for the fault starting from another symptom' | ||
| 3 | FUEL LEVEL SENSOR CHECK | All OK | Problems met | Operation |
| Check the operation of the fuel level sensor, see test --- | Continue to Step 4 | Sensor not working | Replace the fuel pump assembly Op. 1040A70 | |
| 4 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check the continuity/insulation of the cable between the fuel level sensor and the Body Computer : See E4010 INSTRUMENT PANEL | Continue to Step 5 | Cables broken or not insulated | Restore continuity or insulation: See E4010 INSTRUMENT PANEL | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault present | Search for the fault starting from another symptom' | ||