3360303 - L16 CLIMATE CONTROL RECIRCULATION NOT WORKING

When the key on the switch panel is pressed, the

		Results of the tests
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner and check for errors	Continue to Step 2	Air recirculation motor not working	Continue to Step 3
2	CHECKING USING TESTER	All OK	Problems met	Operation
	Keep the Examiner connected and check air recirculation motor operation by means of active diagnosis	Continue to Step 7	Air recirculation motor not working	Continue to Step 3
3	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of the electrical connection between the See   E6020  AIR CONDITIONING	Continue to Step 4	Electrical connection broken or not insulated.	Restore electrical connection continuity/insulation
4	RECIRCULATION MOTOR OPERATION CHECK	All OK	Problems met	Operation
	Disconnect the electrical connector, air recirculation motor side, and check for a control signal from the climate control system node See   E6020  AIR CONDITIONING	Continue to Step 5	Signal absent	Continue to Step 7
5	CHECKING RECIRCULATION MOTOR FLAP	All OK	Problems met	Operation
	Check that the air recirculation motor flap moves through its travel without sticking.	Continue to Step 6	Flap blocked or damaged	Release the air recirculation motor flap from its block or replace the flap if damaged.
6	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Change the air recirculation motor Op. 5040D88
7	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Change the climate control system node Op. 5040D18Search for the fault starting from another symptom'