Z64 ABS CHARGE/DISCHARGE VALVE ERROR - Fiat - STILO - eLearn

3360364 - Z64 ABS CHARGE/DISCHARGE VALVE ERROR

The diagnostic equipment signals one or more of the following errors: C1226 ABS valve error, ADX discharge, C1231 ABS valve, ADX charge, C1236 ABS valve, ASX discharge, C1241 ABS valve, ASX charge, C1246 ABS valve, PDX discharge, C1251 ABS valve, PDX charge, C1256 ABS valve, PSX discharge and/or C1261 ABs valve, PSX charge

This error is signalled if the ABS solenoid valves cannot be operated. This means that there is an open circuit or short circuit (positive or earth) for the solenoid valves or for the solenoid valve connection or that the solenoid valves nearby are short circuited or that the operating cirtcuit is damaged

1	ABS CONTROL UNIT REPLACEMENT	All OK	Problems met	Operation
		Results of the tests
	Replace the ABS electro-hydraulic control unit Op. 3340A12	Continue to Step 2	.
2	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Delete the errors using the diagnostic equipment.Turn the ignition OFF and then ON to make the control unit check whether there are errors present Check that the fault is no longer present	End of diagnosis	.