Z76 TEMPORARY INTERFERENCE ERROR - Fiat - STILO - eLearn

The diagnostic equipment signals the following error: C1506 Temporary interference

This error is signalled if the control unit detects interference or incorrect signals at one or more of the wheel sensors.

1	ELECTRICAL CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check that there is no interference at the system wiring. In particular, check that there are no: Components fitted in the after market Sources of electromagnetic waves, such as cell phonesAlso check that there are no faults at the wiring	Continue to Step 2	Wiring faulty	Renew the wiring
			Accessories fitted in the after market that are creating interference	Electromangetically insulate the components that have been incorrectly fitted. If this is not possible, advise the customer to have these components removed.
			The error was caused by electromagnetic waves.	Continue to Step 2
2	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Delete the errors using the diagnostic equipment.Carry out an engine starting cycle to make the control unit check whether there are still errors present and check that the fault is no longer present using the Examiner	End of diagnosis	.