3362472 - 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R..    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Disconnect the negative battery terminal.1. Remove the protective cap (1a) for the fuel manifold (1b) and discharge the fuel pressure in the manifold using the tool (1c).Collect the fuel in a suitable container.
DescriptionCode
1cRapid attachment connector1.870.684.000
1. Disconnect the single supply pipe from the tank from the fuel manifold.2. Disconnect the electrical connections for the injectors.
DescriptionConnector
2Injector    N70
3. Disconnect the electrical connection for the built-in air temperature sensor.
DescriptionConnector
3Integrated air temperature sensor    K43
Release the electrical wiring for the injectors from the retaining clips and place it at the side.
1. Undo the fixing bolts (1a) and remove the fuel manifold pipe (1b).
Refitting ( Removing ) Fit the single fuel manifold pipe and secure it using the bolts.Secure the electrical wiring to the retaining clips and connect the connectors for the injectors.
DescriptionConnector
-Injector    N70
Connect the electrical connection for the built-in air temperature sensor.
DescriptionConnector
-Integrated air temperature sensor    K43
Connect the single supply pipe from the tank.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Connect the negative battery terminal.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R..