3362531 - 1020A26 CRANKCASE SUMP - R.R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLES WITH AIR CONDITIONING

Removing ( Refitting ) Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R.R.    Op. 1020A30 ENGINE OIL DRAIN PLUG - REPLACE1. Undo the bolts fixing it to the crankcase (1a) and the nuts fixing it to the oil pump casing (1b).2. Undo the lower bolts fixing the gearbox to the engine oil sump.3. Use the tool (3a) and remove the oil sump (3b).

	Description	Code
3a	Blade	1.870.718.000

Refitting ( Removing ) Clean the surfaces of the oil sump and the engine crankcase thoroughly completely removing the remaining sealant.Apply silicon sealant to the entire perimeter of the oil sump.Position the crankcase sump and secure it using the nuts and bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE OIL SUMP	M6	(Cylinder block/crankcase) 1

	Fastening	Component	Ø	Value(daNm)
-	Nut	ENGINE OIL SUMP	M6	(Oil pump casing) 0.9

Tighten the bolts fixing the gearbox to the engine sump to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	MANUAL GEARBOX/DIFFERENTIAL	M12 X 1.25	(Lower) 5.5

    Op. 1020A30 ENGINE OIL DRAIN PLUG - REPLACE    Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R.R.    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 0010T10 CHANGE ENGINE OIL    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.Remove the vehicle from the lift.