1028H20 PISTON WITH CONNECTING ROD - R R - Fiat - STILO - eLearn

3362420 - 1028H20 piston with connecting rod - r r

) Place the car on a lift.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 4450B04 right front wheel r r - 7055B54 under-engine guard - r r - 1048A10 air cleaner filtering element - replace - 1072C44 exhaust manifold heat shield on bulkhead - r+r - 1072C16 exhaust manifold with catalytic converter - r r - 1008B10 power unit front mount (timing side) flexible block - replace - 1008A46 cam shaft left rigid mount - r r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1032D12 timing system protective cover(s) - r + r - 1092B60 alternator drive belt - r + r - 1092A10 Crankshaft services PULLEY - R.R. - 1032B10 toothed timing belt - r + r for timing adjustment or replacement - 1056B60 single fuel manifold pipe, with injectors - r + r - 1016B10 single cylinder head extension - change gasket - 1016C10 cylinder head - r + r and replace gasket - 1020A30 engine oil drain plug - replace - 1020A20 crank case oil sump - r + r clean seals for sealant application - 1084B28 engine oil intake pump - r + r with crankcase sump removed1. Undo the bolts fixing the connecting rod cap.

Lower the ramp.Remove the piston complete with connecting rod.

Refitting ( Removing

) 1. Use the tool (1a) and fit the piston (1b) in the cylinder liner/bore.

	Name	Country
1a	Fitting tool	1.860.700.000

Make sure that the arrow, stamped on the piston crown, is facing the timing side and that the number, stamped on the big end, corresponds to the one of the connecting rod cap.

Position the connecting rod caps and secure them tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BIG END BEARING CAPS	M8	4.1

- 1084B28 engine oil intake pump - r + r with crankcase sump removed - 1020A20 crank case oil sump - r + r clean seals for sealant application - 1020A30 engine oil drain plug - replace - 1016C10 cylinder head - r + r and replace gasket - 1016B10 single cylinder head extension - change gasket - 1056B60 single fuel manifold pipe, with injectors - r + r - 1032B10 toothed timing belt - r + r for timing adjustment or replacement - 1092A10 Crankshaft services PULLEY - R.R. - 1092B60 alternator drive belt - r + r - 1092B64 alternator drive belt - adjust tension - 1032D12 timing system protective cover(s) - r + r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1008A46 cam shaft left rigid mount - r r - 1008B10 power unit front mount (timing side) flexible block - replace - 1072C16 exhaust manifold with catalytic converter - r r - 1072C44 exhaust manifold heat shield on bulkhead - r+r - 1048A10 air cleaner filtering element - replace - 0010T10 change engine oil - 0010T20 coolant change - 7055B54 under-engine guard - r r - 4450B04 right front wheel r r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Remove the vehicle from the lift.