3362741 - 1820B48 FLEXIBLE supply PIPE to operating cylinder -R.R.

Removing ( Refitting ) Position the vehicle on the rampRemove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Raise collar (1a) and disconnect the rigid pipe (1b) with damper from the slave cylinder. 1. Release the pipe from the retaining band. 1. Raise the clip (1a) and disconnect the pipe (1b) from the clutch release cylinder (1c).Remove the pipe from the engine compartment. Refitting ( Removing ) Fit the pipe in the engine bay and connect it to the clutch release cylinder.Connect the rigid pipe to the master cylinder (pump) and then do up the retaining collar.Secure the rigid pipe to the band in the wheel compartment. - 0010T67  hydraulic clutch system bleed airRemove the car from the ramps.