3363558 - 1020A24 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION WITH ENGINE OR INTERFERING COMPONENTS REMOVED

Removing ( Refitting )     Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVETurn the engine on the overhaul stand.1. Undo the nuts (1a) and bolts (1b) securing the oil sump to the crankcase.2. Using the tool shown cut the silicone sealant along the entire perimeter of the oil sump.

	Description	Code
2	Blade	1.870.718.000

3. Remove the engine oil sump. Refitting ( Removing ) Clean any sealant residues from the matching surfaces between the sump and the lower crankcase.1. Apply the specified sealant continuously without any breaks over the entire perimeter of the crankcase sump as shown in the figure.

Join the end to the beginning seamlessly.

	Type	Component	Description	Qty.
1	Silicon sealant	ENGINE OIL SUMP	LOCTITE 5900	-

2. Fit crankcase sump (2a) and secure by tightening bolts (2b) and nuts (2c) to the specified torque.

When positioning the crankcase sump, avoid significant sideways movements that could remove the sealant.

	Fastening	Component	Ø	Value(daNm)
2b	Bolt	ENGINE OIL SUMP	M6	1

	Fastening	Component	Ø	Value(daNm)
2c	Nut	ENGINE OIL SUMP	M6	0.5

Wait for at least one hour after fitting the crankcase sump before refilling with engine oil.

    Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVE.