3362408 - 1020D16 front crankshaft oil seal cover - r+r and replace gaskets for versions with airconditioner

Removing ( Refitting ) Place the car on a lift. - 1048A10  air cleaner filtering element - replace - 1056B60  single fuel manifold pipe, with injectors - r + r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1092B60  alternator drive belt - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1008B10  power unit front mount (timing side) flexible block - replace - 1008A46  cam shaft left rigid mount - r r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1088C14  water pump - r + r with drive belt removed - 1072C44  exhaust manifold heat shield on bulkhead - r+r - 1072C16  exhaust manifold with catalytic converter - r r - 1032B44  toothed drive pulley - r + r with timing belt removed - 1020A30  engine oil drain plug - replace - 1084B30  engine oil filter r r - 1020A20  crank case oil sump - r + r clean seals for sealant application - 1084B28  engine oil intake pump - r + r with crankcase sump removed1. Undo the fixing bolts (1a) and remove the rpm sensor (1b)2. Disconnect the electrical connection for the engine oil pressure switch.

	Name	Connector
2	Engine oil pressure sensor (switch)	K30

1. Undo bolts (1a) and remove oil pump (1b). Refitting ( Removing ) Fit oil pump and tighten securing bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CRANKSHAFT FRONT COVER	M6	1

Connect the electrical connection for the engine oil pressure switch.

	Name	Connector
-	Engine oil pressure sensor (switch)	K30

 - 1084B28  engine oil intake pump - r + r with crankcase sump removed - 1020A20  crank case oil sump - r + r clean seals for sealant application - 1084B30  engine oil filter r r - 1020A30  engine oil drain plug - replace - 1032B44  toothed drive pulley - r + r with timing belt removed - 1072C16  exhaust manifold with catalytic converter - r r - 1072C44  exhaust manifold heat shield on bulkhead - r+r - 1088C14  water pump - r + r with drive belt removed - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1008A46  cam shaft left rigid mount - r r - 1008B10  power unit front mount (timing side) flexible block - replace - 1032D12  timing system protective cover(s) - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092B60  alternator drive belt - r + r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1056B60  single fuel manifold pipe, with injectors - r + r - 1048A10  air cleaner filtering element - replace - 0010T12  engine oil and filter replace - 0010T20  coolant changeRemove the vehicle from the lift.