3362428 - 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Removing ( Refitting )     Op. 4450B04 RIGHT FRONT WHEEL - R.RRaise the vehicle on the lift.1. Remove the protective plug (1a) on the engine flywheel protective guard (1b).2. Undo the bolt fixing the engine flywheel protective guard.
1. Insert the flywheel lock (1a) and secure it using the bolt (1b) removed previously.
DescriptionCode
1aFlywheel lock1.871.000.400
1. Fit the tool (1a) and remove the pulley loosening the fixing bolt (1b).
This operation is necessary, in spite of the flywheel lock having been fitted, to lock the pulley preventing it from bending during the loosening/tightening of the fixing bolt with consequent damage to the internal locating pin.
DescriptionCode
1aCounter-torque1.870.763.000
Refitting ( Removing ) Fit the drive pulley and tighten the fixing bolt to torque with the pulley retaining tool fitted.
FasteningComponentØ  Value(daNm)
-BoltDRIVE PULLEY(PULLIES) TIMINGM12 X 1.252 + 90°
DescriptionCode
-Counter-torque1.870.763.000
Remove the flywheel lock.
DescriptionCode
-Flywheel lock1.871.000.400
Fit the bolt fixing the flywheel protective guard.Fit the engine flywheel guard protective plug.    Op. 4450B04 RIGHT FRONT WHEEL - R.R