1820B20 (PUMP) - MASTER CYLINDER R.R. - Fiat - STILO - eLearn

3362732 - 1820B20 (Pump) - MASTER CYLINDER R.R.

) Remove the car from the ramps. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Remove the clip (1a) and release the push rod (1b) for the master cylinder from the clutch pedal.

1. Partly lift up the spring (1a) and disconnect the pipe (1b) on the hydraulic clutch damper.2. Remove the fastening band (2a) and disconnect the brake/clutch fluid reservoir hose.3. Undo nuts (3a) and remove master cylinder (pump) (3b).

Refitting ( Removing

) Refit the master cylinder (pump) in its housing and tighten the retaining nuts

	Fastening	Component	Ø	Value(daNm)
-	Nut	CLUTCH FLUID MASTER CYLINDER	M8	1.5

Connect the brake-clutch fluid reservoir hose.Fit the pipe with damper on the pump master cylinder, then close the retaining clip.Secure the pump master cylinder pushrod to the pedal. - 0010T67 hydraulic clutch system bleed airConnect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the car from the ramps.