3362734 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
(
Refitting
)
Place the car on the ramp.Remove the protective cap from the bleed
valve of one front brake caliperConnect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch
fluid reservoir is empty. Using syringe, drain the brake/clutch fluid
from the reservoir.1. Raise the clip (1a) and disconnect the flexible pipe (1b) from
the slave/actuator cylinder.2. Undo the retaining bolts.3. Remove the operating cylinder from the engine compartment.
Refitting
(
Removing
)
Fit the operating cylinder and secure it
with its bolts. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CLUTCH CONTROL HYDRAULIC ACTIVATOR | M8 | 1.8 |