3362742 - 1820B58 clutch hydraulic circuit vibration damper - r+r

Removing ( Refitting ) Position the vehicle on the rampRemove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Lift the clip (1a) and disconnect the pipe (1b) from the clutch release cylinder.Release the pipe from the anchorage clip in the wheel compartment. 1. Raise collar (1a) then disconnect and remove damper (1b) from the pump master cylinder complete with the rigid pipe. Refitting ( Removing ) Fit the pipe in the engine bay and connect it to the clutch release cylinder, then do up the retaining collar.Connect the rigid pipe to the master cylinder (pump), then do up the retaining clip.Secure the rigid pipe to the retaining collar in the wheel compartment. - 0010T67  hydraulic clutch system bleed airRemove the car from the ramps.