3362750 - 2110D52 FLANGE ON DIFFERENTIAL - R.R WITH DRIVESHAFT REMOVED

Removing ( Refitting ) 1. Position a suitable container and drain the gearbox oil after undoing the plug. 1. Using a suitable lever, prise off the drive shaft inner mounting shaft from the differential.2. Undo the fixing bolts (2a) and remove the flange (2b) complete with oil seal.Remove the adjustment shim. Refitting ( Removing ) Check that the left flange oil seal is undamaged.1. If it needs to be replaced, remove the oil seal from the flange and using the tools (1a) and (1b), fit the new oil seal.

	Name	Country
1a	Grip	1.870.007.000

	Name	Country
1b	Fitting tool	1.870.629.000

Fit the adjustment shim.Fit the flange, tightening the bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	MAN G/BOX DIFF SEALING FLANGE/S	M10	4.9

Fit the drive shaft inner mounting shaft onto its seat on the differential.    Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.