3362753 - 2110D63 RIGHT DIFFERENTIAL SHAFT OIL SEAL - R.R

Removing ( Refitting ) Place the car on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R1. Position a suitable container and drain the gearbox oil after undoing the plug. 1. Undo the nut fixing the steering box track rod end to the front hub steering knuckle.2. Separate the ball joint (2a) from the front hub knuckle using the tool (2b).

	Name	Country
2b	Head extractor	1.847.035.000

3. Unscrew the bolts securing the damper to the front hub knuckle. 1. Remove collar (1a) securing the sliding coupling sleeve (1b) and move the half-axle aside.     2110D61 right differential oil seal - r r with drive shaft removed Refitting ( Removing )     2110D61 right differential oil seal - r r with drive shaft removedFit the drive shaft to the differential and fit the sliding joint gaiter retaining clamps.Tighten to torque the bolts securing the shock absorber to the front hub steering knuckle.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT HUB STEERING KNUCKLE.	M10 x 1.25	7.5

Fit the steering box link ball joint to the front hub knuckle.Tighten the nut fixing the steering rod to the steering knuckle to a torque of 3.2 daNm, loosen the nut by 90 degrees, then tighten it to the torque given below; carry out the same operation for the other steering rod.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE LINK BALL JOINTS	M10 x 1.25	(to the steering knuckle) 4

    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARYRemove the vehicle from the lift.