3362883 - 3340B56 RIGID PIPE from hydraulic CONTROL UNIT to RIGHT FRONT BRAKE - R.R.

Removing ( Refitting ) Place the car on a lift.  - 4450B12  front or rear wheels (two) - r+r - 7055B54  under-engine guard - r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. Refitting ( Removing ) Fit the rigid pipe from the electrohydraulic control unit to the front right brake.Raise the jack until the crossmember is fully home against the bodyshell.Tighten to torque the bolts securing the crossmember to the body longitudinal member.

FasteningComponentØValue(daNm)
-BoltENGINE OR ROD ANCHORAGE BEAMM14 x 1.515
Tighten to torque the bolts securing the crossmember brackets to the body longitudinal member.

FasteningComponentØValue(daNm)
-BoltENGINE OR ROD ANCHORAGE BEAMM12 x 1.2511.
Tighten to torque the bolts securing the steering box to the crossmember.

FasteningComponentØValue(daNm)
-BoltENGINE OR ROD ANCHORAGE BEAMM12 x 1.258,5