3363175 - 5580H30 REAR SENSORS for' parking obstacle detection system - R.R.

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 7040B10  load platform (luggage platform) trim - r+rRemove the sliding rear parcel shelf. - 7040B22  luggage compartment/load platform moulding - r+r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7210E66  R.R. REAR BUMPER1. Disconnect the electrical connections (1a) for the parking sensors, then remove the wiring (1b).

	Name	Connector
1a	Parking sensor unit	K97

1. Rotate the sensor in a clockwise direction and extract it from the bumper.2. Remove the parking sensor exterior trim.Repeat the operation for the remaining parking sensors. Refitting ( Removing ) Fit the exterior trim for the parking sensors on the bumper.Fit the sensors in the special housings in the bumper, then fasten them by pushing them downwards, turning them in an anti-clockwise direction at the same time.Connect the electrical connections for the parking sensors.

	Name	Connector
-	Parking sensor unit	K97

 - 7210E66  R.R. REAR BUMPER - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B22  luggage compartment/load platform moulding - r+rPosition the sliding rear parcel shelf. - 7040B10  load platform (luggage platform) trim - r+rConnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 5530B56  BATTERY DRIP TRAY COVER - R.R.