3362884 - 3340B62 rear connection central pipe - r r
Removing
(
Refitting
)
Place the car on a ramp. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.
Refitting
(
Removing
)
Place the rigid pipe from the
electrohydraulic control unit to the pipe connector to the rear
brakes.Secure the pipe to the retaining clips
present on the bodyshell.Using the special tool, tighten the rigid
pipe connector to the rear brake pipes. | Name | Country |
|---|---|---|
| - | Spanner | 1.856.127.000 |
Removing
(
Refitting
)
Remove the protective cap from the bleed
valve of one front brake caliperConnect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch
fluid reservoir is empty. Place the car on a ramp. - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL
UNIT R.R. - 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM
- R.R .1. Undo the connector (1a) at the rear brake pipes and release it
from the bands (1b) on the bodyshell. Release the pipe from the remaining retaining
clips and remove the pipe.
Refitting
(
Removing
)
Fit the pipe and secure it to the retaining
clips.Tighten the connector to the rear brake
pipes and secure it to the bands on the bodyshell. - 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM
- R.R . - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL
UNIT R.R. - 0010T64 brake and or clutch fluid check level and top up
as necessary - 0010T65 hydraulic brake system bleed airRemove the vehicle from the lift.