3362998 - 5040A72 evaporator outlet pipe - r r
Removing ( Refitting ) - 5530B56 BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 1016A40 ignition coil cover on cylinder head- r+r - 1056B82 injection/ignition system e.c.u. (one) - r + rMove the electrical connectors aside. - 1048A28 vacuum air circuit resonator pipe - r+r - 1056B14 throttle case - r + r - 1056B87 ignition/injection system control unit mount - r r1. Disconnect the pipe from the expansion valve to the compressor (1), expansion valve side, undoing the fixing bolt (1b).
Release the gas and fuel pipes
from the retaining band.Undo the bolt fixing the mounting bracket
for the retaining band for the pipe from the expansion valve to the
joint.Raise the car on a lift. - 7055B54 under-engine guard - r r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(right side).
1. Undo the front bolts (1a) fixing the fuel pipe shield (1b) and
move the shield aside.2. Release the fuel pipes from the retaining bands to facilitate
the removal of the air conditioning pipe.
1. Undo the nut (1a) fixing the pipe with the joint to the compressor
inlet pipe (1b).
1. Remove the pipe from the expansion valve to the joint from the
compressor inlet pipe.
Refitting
(
Removing
)
Position the pipe from the
expansion valve to the compressor inlet pipe.Secure the pipe with the joint to the compressor
inlet pipe tightening the fixing nut.
Check for the seal at the end of the pipe before securing it to the joint on the compressor inlet pipe. |
Check for the seal at the end of the pipe before securing it to the expansion valve. |