5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R. - Fiat - STILO - eLearn

3363152 - 5580C22 AIR BAG MODULE - Passenger side - R.R.

Before removing and refitting the Air Bag module, the following preliminary operations must be carried out: (1) turn the ignition off ('STOP') and remove; (2) remove the battery compartment cover, disconnect the battery negative lead and insulate the leads; (3) wait 10 minutes before proceeding.

FOLLOW ALL THE RECOMMENDED SAFETY FULES ( See assembly 5580C air bag system ).

Removing ( Refitting

) - 7040A45 facia rh side cover - r r - 7040A31 flap assembly - r r - 7040A07 upper compartment on facia - r rMove the airbag module aside. 1. Undo bolts (1a) securing airbag (1b) using a 614 1/4 series USAG wrench with a USAG 330 1/4 extension and a 691E or similar insert. 2. Disconnect the electrical connector for the passenger air bag.

	Name	Connector
2	Air Bag in dashboard (passenger side)	Q11

Recover the side Air Bag module.

Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) If a new module is being fitted, attach the appropriate labels. Detach the removable part of the adhesive label from the new module and put it in a specific file recording the vehicle details (model, registration data, chassis no.) and the serial no. of the old module. This file should be kept for future checks. A new label is supplied together with the module to be stuck on top of the existing one. It must be perforated first by the month, 10 years after the year in which the module is fitted (e.g. for 2000, this will be 2010).

Handle the Air Bag module with extreme caution. Ensure the battery is disconnected.

If removed, position the brackets and secure them using the bolts.Connect the electrical connector.

	Name	Connector
-	Air Bag in dashboard (passenger side)	Q11

Fit the connector safety clips.Place the Air Bag module back in its housing.Fit the airbag module by tightening the retaining bolts. - 7040A07 upper compartment on facia - r r - 7040A31 flap assembly - r r - 7040A45 facia rh side cover - r rConnect the battery negative terminal.Fit the battery cover.Check the operation of the system using the Examiner or the other diagnostic equipment.