3363311 - 7025A10 bonnet lid - square

Lift the bonnet and support it in an appropriate manner.To adjust the bonnet lid in a vertical direction, carry out the operations described below.1. Loosen the bolts fixing the bonnet lock. 1. Loosen the bolts fixing the bonnet hinges, bonnet side. Proceed with the adjustment of the bonnet position, making use of the slotted oepnings in the bolts fixing the lock and the bonnet hinges. If necessary, alter the height of the buffer blocks.Following adjustment, tighten the bolts fixing the lock and the bonnet hinges to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BONNET LID HINGES	M6	(Bonnet lid) 0.85

	Fastening	Component	Ø	Value(daNm)
-	Ball bearing	BONNET LID HINGES	M8	(Bonnet lid) 2.5

To adjust the bonnet in a lengthwise and sideways direction, carry out the operations described below.

Visually inspect to check that the gap between the bonnet, the wings (left and right) and the front bumper is even.

1. Loosen the bolts fixing the bonnet hinges. Proceed with the adjustment of the bonnet position, making usre of the slotted openings in the bolts fixing the hinges, bodyshell side.Following adjustment, tighten the bolts fixing the bonnet hinges, bodyshell side, to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BONNET LID HINGES	M8	(Bodyshell) 2.5