7040H68 (ONE), TAILGATE HOUSING PILLAR TRIM LEFT OR RIGHT - R.R . - Fiat - STILO - eLearn

3363394 - 7040H68 (ONE), TAILGATE HOUSING PILLAR TRIM LEFT OR RIGHT - R.R .

) Remove the rear parcel shelf.Remove the luggage compartment seal in contact with the rear pillar trim, as necessary.1. Lift up the rear seat cushion (1b) using the special rod (1a).

1. Undo the bolt (1a) fixing the lower rod anchoring the rear side seat belt (1b).

1. Using a special knife, remove the rear pillar trim, releasing it from the inner retaining springs.

	Name	Country
-	Scraper blade	1.878.077.000

1. Remove the rear seat belt (2a) from the rear pillar trim via the slot (2b) in the actual trim.

Refitting ( Removing

) Pass the rear seat belt through the slot in the rear pillar trim.Fit the rear pillar trim in position, checking that the inner retaining springs are correctly inserted. Tighten the bolts fixing the rear side seat belt lower mounting rod to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BELT BRANCH WITH ATTACHMENT BUCKLE...	M10	(Bodyshell) 2.5

Reposition the rear seat cushion.Fit the luggage compartment seal in its housing.Fit the parcel shelf.