3362487 - 1076A40 exhaust pipe heat shield - r r

Removing ( Refitting ) Position the vehicle on the ramp. - 1076B26  intermediate exhaust silencer - r+r emission control versions1. Drill out the heat shield retaining rivets.2. Undo the fixing bolts (2a) and remove the front retaining clips (2b).3. Remove the front heat shield. 1. Undo the bolt securing the flexible support to the bodywork.2. Remove the rear exhaust silencer. 1. Undo the nuts (1a), bolt (1b) and remove the rear left plastic shield (1c). 1. Remove the retaining clips (1a), undo the bolts (1b) and remove the rear heat shield (1c). Refitting ( Removing ) Place the rear heat shield back in its housing and fasten it using the clips and screws.Fit the rear left plastic protection and tighten the bolts.Fit the rear exhaust silencer and secure it to the flexible mountings.Place the front heat shield back in its seating and secure it using new rivets.Tighten the fixing bolts and fit the front clips. - 1076B26  intermediate exhaust silencer - r+r emission control versionsRemove the car from the ramp.