3362545 - 1016B26 rh cylinder head extension -r r with timing belt removed -replace gasket

Removing ( Refitting )  - 1048A32  sleeve from air cleaner to intake manifold - r + r - 1056B15  throttle body intergral with mds - r r1. Undo the bolts (1a) and remove the upper rear timing belt shield (1b).  - 1084A16  oil dip stick pipe - r r - 1084A22  engine oil filler - r r - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed - 1080B94  front lambda probe with catalitic converter r r - 1072C44  exhaust manifold heat shield on bulkhead - r+r1. Unscrew bolts (1a) and remove right cylinder head extension (1b).2. Remove the right cylinder head extension gasket. Refitting ( Removing ) Refit a new right cylinder head extension gasket.Place the right camshaft housing back in its housing and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	RIGHT CYLINDER HEAD EXTENSION	M8	1,3 - 1,6

 - 1072C44  exhaust manifold heat shield on bulkhead - r+r - 1080B94  front lambda probe with catalitic converter r r - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r - 1084A22  engine oil filler - r r - 1084A16  oil dip stick pipe - r rPlace the rear timing belt shield and secure it using the bolts.  - 1056B15  throttle body intergral with mds - r r - 1048A32  sleeve from air cleaner to intake manifold - r + r