3362557 - 1036G20 camshaft controlling intake valves in top head - r + r with top head removed - includes replacement of top head if necessary
Removing
(
Refitting
)
Place the vehicle on a ramp.
- 1016A10 sound-proofing cover - r + r - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. | Name | Connector |
|---|---|---|
| - | Battery | A1 |
Refitting
(
Removing
)
- 1036G22 camshaft in rh head extension - r+r with head extension
and timing belt removed - 1016B26 rh cylinder head extension -r r with timing belt
removed -replace gasket - 1072C44 exhaust manifold heat shield on bulkhead - r+r - 1080B94 front lambda probe with catalitic converter r r - 1032B40 toothed-driven pulley (one) - r + r with timing belt
removed - 1072B50 sleeves connecting air capacity box to inlet manifold
is - r+r - 1084A22 engine oil filler - r r - 1084A16 oil dip stick pipe - r r - 1056B15 throttle body intergral with mds - r r - 1048A32 sleeve from air cleaner to intake manifold - r +
r - 1032B10 toothed timing belt - r + r for timing adjustment
or replacement - 1036G49 rear camshaft seal, lh or rh - r r with mount and
coil/s removed - 1056B87 ignition/injection system control unit mount - r
r - 1056B82 injection/ignition system e.c.u. (one) - r + r - 1092A10 Crankshaft services PULLEY - R.R. - 1032D12 timing system protective cover(s) - r + r - 1008A46 cam shaft left rigid mount - r r - 1008B10 power unit front mount (timing side) flexible block
- replace- 5510C10 ignition coil/s - r+r - 1092B50 alternator/air conditioner compressor drive belt
- adjust tension - 1092B54 alternator/water pump drive belt - adjust tension
- 4450B10 Front WHEEL (one) - R.R.
(Right
side).
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(Right side).
- 7055B54 under-engine guard - r rConnect the battery's negative terminal. | Name | Connector |
|---|---|---|
| - | Battery | A1 |