3362864 - 3330D76 FORKS for' idler shaft on brake servo - R.R. on right hand drive versions
Removing ( Refitting ) 1. Open clip (1a) and extract retaining pin (1b), then release the forks from the pushrod on the mount on brake servo (1c).2. Remove retaining ring (2a) and extract fork retaining pin (2b).3. Remove the idler shaft forks from the mount.
Refitting
(
Removing
)
Position the idler shaft mount
forks, insert the retaining ring between idler shaft and forks,
then fit the retaining ring.Insert the retainingpin between brake servo
mount pushrod and forks, then fit the retaining clip.