3362885 - 3340B70 RIGID PIPE (one), left or right, from connector to intermediate cable - R.R.

Removing ( Refitting ) Remove the car from the ramps. - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .- 1076A44 intermediate exhaust silencer rear heat shield r r 1. Use the special tool to disconnect the intermediate connector.

NameCountry
-Box wrench for brake fittings1.856.132.000
1. Using the special tool, disconnect the connector (1a) of the rigid pipe to the rear left caliper intermediate hose.

NameCountry
-Box wrench for brake fittings1.856.132.000
Undo retaining clips and remove the rigid pipe from connector to rear left brake.
Refitting ( Removing ) Position the rigid pipe from the connector to the rear brake.Secure the pipe to the retaining clips.Using the special tool, connect the connector of the rigid pipe to the rear left caliper intermediate hose.

NameCountry
-Box wrench for brake fittings1.856.132.000
Using the special tool, connect the intermediate connector.

NameCountry
-Box wrench for brake fittings1.856.132.000
- 1076A44 intermediate exhaust silencer rear heat shield r r  - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R . - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed airRemove the car from the ramps. Removing ( Refitting ) Remove the car from the ramps. - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R . - 1076A40  exhaust pipe heat shield - r rRemove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Disconnect the intermediate connector.
1. Disconnect the connector for the rigid pipe to the left rear caliper intermediate flexible pipe.Undo retaining clips and remove the rigid pipe from connector to rear left brake.
Refitting ( Removing ) Position the rigid pipe from the connector to the rear brake.Secure the pipe to the retaining clips.connect the connector for the rigid pipe to the left rear caliper intermediate flexible pipe.Connect the intermediate connector. - 1076A40  exhaust pipe heat shield - r r - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R . - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed airRemove the car from the ramps.