3363172 - 5580H06 wiring of parking sensor system r r

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 7040B10  load platform (luggage platform) trim - r+rRemove the sliding rear parcel shelf.  - 7040B22  luggage compartment/load platform moulding - r+r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7210E66  R.R. REAR BUMPER1. Disconnect the electrical connections (1a) for the obstacle detection sensors, then release the wiring from the retaining bands (1b).

	Name	Connector
1a	Parking sensor unit	K97

2. Remove the electrical wiring for the parking sensors system. Refitting ( Removing ) Position the parking sensors system wiring in the bumper and connect the electrical connections for the parking sensors.

	Name	Connector
-	Parking sensor unit	K97

Close the wiring retaining bands on the bumper. - 7210E66  R.R. REAR BUMPER - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B22  luggage compartment/load platform moulding - r+rPosition the sliding rear parcel shelf. - 7040B10  load platform (luggage platform) trim - r+rConnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 5530B56  BATTERY DRIP TRAY COVER - R.R.