5580H10 PARKING OBSTACLE DETECTION DEVICE ELECTRONIC CONTROL UNIT - R R - Fiat - STILO - eLearn

3363173 - 5580H10 parking obstacle detection device electronic control unit - r r

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 7040B10 load platform (luggage platform) trim - r+rRemove the sliding rear parcel shelf. - 7040B22 luggage compartment/load platform moulding - r+r - 7040B04 side moulding one lh or rh of luggage compartment luggage plate r r1. Disconnect the electrical connection (1a) and the electrical connection (1b) in the parking sensors electrical control unit.

	Name	Connector
1a	Parking sensor control unit	M84C

	Name	Connector
1b	Parking sensor control unit	M84A

2. Undo the bolt (2a) and remove the control unit (2b) from the vehicle.

Refitting ( Removing

) Place the obstacle detection electrical control unit in its original position in the luggage compartment, then tighten the fixing bolt.Connect the electrical connections for the parking obstacle detection control unit.

	Name	Connector
-	Parking sensor control unit	M84C

	Name	Connector
-	Parking sensor control unit	M84A

- 7040B04 side moulding one lh or rh of luggage compartment luggage plate r r - 7040B22 luggage compartment/load platform moulding - r+rPosition the sliding rear parcel shelf.Connect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 5530B56 BATTERY DRIP TRAY COVER - R.R.