3363176 - 5580H36 parking sensor system rear sensor (1), lh or rh - r r

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 7040B10  load platform (luggage platform) trim - r+rRemove the sliding rear parcel shelf. - 7040B22  luggage compartment/load platform moulding - r+r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7210E66  R.R. REAR BUMPER1. Disconnect the electrical connection for the obstacle detection sensor (1a), then rotate the sensor (1b) in a clockwise direction and extract it from the bumper.

	Name	Connector
1a	Parking sensor unit	K97

2. Remove the parking sensor outer trim. Refitting ( Removing ) Fit the parking sensor outer trim on the bumper.Fit the sensor in the special housing in the bumper, then fasten it by pushing it downwards and turning it in an anti-clockwise direction at the same time.Connect the electrical connection for the parking sensor.

	Name	Connector
-	Parking sensor unit	K97

 - 7210E66  R.R. REAR BUMPER - 5540A56  dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary - 7040B06  side trim (one) lh or rh, load compartment/load platform - r r - 7040B04  side moulding one lh or rh of luggage compartment luggage plate r r - 7040B22  luggage compartment/load platform moulding - r+rPosition the sliding rear parcel shelf. - 7040B10  load platform (luggage platform) trim - r+rConnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 5530B56  BATTERY DRIP TRAY COVER - R.R.