1028H60 SET OF PISTONS, GUDGEON PINS AND SEALS - REPLACE PISTONS AND CONNECTING RODS AT THE BENCH - INCLUDES ALIGNMENT AND BALANCING - Fiat - STILO - eLearn

3363563 - 1028H60 SET OF PISTONS, GUDGEON PINS AND SEALS - REPLACE PISTONS AND CONNECTING RODS AT THE BENCH - INCLUDES ALIGNMENT AND BALANCING

) Op. 1028H54 PISTON WITH CONNECTING ROD - DISMANTLING AT THE BENCH, operation to be carried out on the entire set of pistons.1. Use pliers (1a) to remove the piston rings (1b) from the piston.

Refitting ( Removing

) Clean any carbon residues from the piston crown.1. Check that the weight difference between the pistons corresponds to the recommended figures.2. Slight machining in the areas for equalizing the weight is permitted.

	Measurement		Value
2	Weight difference between pistons (g.)		+- 5

Check the connecting rod alignment using a sample pin.If the connecting rod is not aligned, replace it.Using the same pliers, fit the circlips on the pistons. Op. 1028H54 PISTON WITH CONNECTING ROD - DISMANTLING AT THE BENCH, operation to be carried out on the entire set of pistons.