3362366 - 0010T21 coolant check density and top up if necessary

Check that the coolant level is between the MIN and MAX marks on the expansion tank.

Carry out this check with the vehicle on a flat surface, several minutes after the engine has been switched off.

When the engine is hot, do not remove the tank cap; there is a danger of burn injury.

If necessary, top up the level by unscrewing the cap and adding coolant.For vehicles with Blue Paraflù 11 top up the level using the same fluid.

	Type	Component	Name	Qty.
-	Fluid	ENGINE COOLING CIRCUIT	PARAFLU' 11	-

For vehicles with Red Paraflù 11 top up the level using the same fluid.

	Type	Component	Name	Qty.
-	Fluid (l)	ENGINE COOLING CIRCUIT	PARAFLU UP	-

Never mix the two fluids, always top up the level using the same type of fluid.

Never exceed the MAX level.

Fit the cap.Start the vehicle and leave the engine to idle for a few minutes.Turn off the engine and wait for a few minutes.Recheck that the engine coolant level lies between the MIN and MAX notches on the expansion tank.