3363245 - 7010A08 rear side door interior support frame-r r with door panel removed

Move the glass half way down its travel until the glass retaining clip can be seen through the inspection hole.
Removing ( Refitting ) 1. Undo retaining clip (1b) through the inspection hole (1a) and then release glass (1c).Secure the rear door glass as appropriate.2. Unscrew the door lock bolts.
1. Raise lever (1a) and disconnect the side door junction (1b).

NameConnector
1bLeft /rear door. coupling  D35 

NameConnector
1bRear/right door coupling right  D36 
2. Prise out the side door junction cable duct
1. Undo the fixing bolts (1a) and remove the support frame (1b).2. Disconnect the cable for opening the door from the outer handle.