3360220 - F46 ASR FUNCTION WILL NOT GO OFF
When the ASR function deactivation button is pressed, the ASR deactivated message does not appear on the panel for 5 seconds and the button led does not come on; The function is not deactivated| Results of the tests | ||||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | ||
|---|---|---|---|---|---|---|
| Connect an Examiner to the tester input and check the brake node for the following in error modes: 
 In parameter mode 
 | Continue to Step 4 | There are errors in the control unit | Continue according to the instructions for the diagnostic equipment Op. 3310A48 | |||
| The parameter does not change state | Continue to Step 2 | |||||
| 2 | CHECK SWITCH | All OK | Problems met | Operation | ||
| Check that the ASR switch is working | Continue to Step 3 | Faulty switch | Replace ASR switch Op. 3350A10 | |||
| 3 | CHECK SWITCH CONNECTIONS | All OK | Problems met | Operation | ||
| Check the continuity of the ASR switch circuit See E7020 ABS | Continue to Step 4 | Lack of continuity | Restore connections See E7020 ABS | |||
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation | ||
| Check
that the fault is no longer present 
 | Fault persists | Change the brake system control unit Op. 3340A20Search for the fault starting from another symptom' | ||||
