3362591 - 1036C39 timing variator on cylinder head intake camshaft - r r

Removing ( Refitting ) Place the car on a ramp. - 1016A40  ignition coil cover on cylinder head- r+r- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 1048A28  vacuum air circuit resonator pipe - r+r - 1048A32  sleeve from air cleaner to intake manifold - r + r - 1048A23  cold air intake - r r - 4450B10  Front WHEEL (one) - R.R. - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1088B10  engine cooling tank - r + r - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket- 1092B40 air conditioner compressor/alternator drive belt - r + r  - 1008A46  cam shaft left rigid mount - r r - 1032D12  timing system protective cover(s) - r + r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner1. Undo the bolts (1a) using the tool (1b) for counter-torque and remove the inlet side driven toothed pulley (1c).

	Name	Country
1b	Counter-torque	1.860.856.000

2. Undo the bolt (2a), using tools (2b) and (2c) for counter-torque, then remove the exhaust side driven toothed pulley (2d).

	Name	Country
2b	Support for counter-torque	1.860.831.000

	Name	Country
2c	Counter-torque	1.860.848.000

1. Undo the fixing bolts (1a) and move the cam angle sensor (1b) away from the cylinder head.2. Undo the bolts (2a) and remove the inlet side camshaft caps (2b).3. Remove the upper bearing shell for the front camshaft support, inlet side.4. Remove the camshaft.5. Remove the lower bearing shell for the front camshaft support.6. Remove the camshaft front oil seal.  - 1036C40  timing variator on inlet camshaft in cylinder head r + r with shaft removed Refitting ( Removing )  - 1036C40  timing variator on inlet camshaft in cylinder head r + r with shaft removedPlace the inlet side camshaft front support lower half-bearing back in its housing.Place the camshaft in its housing.Place the inlet side camshaft front support upper half-bearing back in its housing.Fit the camshaft caps, with the exception of those for the 3rd support (in place of which gauges for the timing will be fitted) and fix them tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	1.5

1. Fit the front camshaft oil seal, exhaust side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.824.000

1. Fit the front camshaft oil seal, inlet side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.844.000

Position the cam angle sensor and secure it using the bolt.Position the exhaust side driven pulley and secure it without tightening the bolt.Position the inlet side driven pulley and secure it without tightening the bolts. - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1008A46  cam shaft left rigid mount - r r- 1092B40 air conditioner compressor/alternator drive belt - r + r  - 1016A20  single cam cover - r + r and replace gasket - 5510C14  ignition coil/s - r+r - 1088B10  engine cooling tank - r + r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54  under-engine guard - r r - 4450B10  Front WHEEL (one) - R.R. - 1048A23  cold air intake - r r - 1048A32  sleeve from air cleaner to intake manifold - r + r - 1048A28  vacuum air circuit resonator pipe - r+rConnect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling  - 1016A40  ignition coil cover on cylinder head- r+rRemove the vehicle from the ramp.