1080B93 RIGHT UPPER LAMBDA SENSOR R R - Fiat - STILO - eLearn

3362601 - 1080B93 right upper lambda sensor r r

) Position the vehicle on the ramp. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 7055B54 under-engine guard - r r . - 1072C44 exhaust manifold heat shield on bulkhead - r+r . 1. Disconnect the electrical connection for the right Lambda sensor.

	Name	Connector
1	Air-Bag front sensor	K39

2. Release the electrical wiring for the right Lambda sensor from the fastening.3. Undo and remove the right Lambda sensor.

Refitting ( Removing

) Place the right Lambda sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	RIGHT LAMBDA SENSOR	M18	(Exhaust manifold side) 4.1 ÷ 5.0

Secure the electrical wiring for the right Lambda sensor to the fastening.Connect the electrical connection for the right Lambda sensor. - 1072C44 exhaust manifold heat shield on bulkhead - r+r . - 7055B54 under-engine guard - r r . Connect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the car from the ramp.