3362735 - 1820B38 hydraulic clutch actuator r r and bleed air with gearbox removed

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the hydraulic clutch actuator (1b).
Refitting ( Removing ) Clean any residues of sealant from the matching surfaces between the hydraulic clutch actuator and the gearbox.Apply silicone sealant to the matching surface of the hydraulic clutch actuator and the gearbox.Place the hydraulic clutch actuator back in its housing and secure it by tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCLUTCH CONTROL HYDRAULIC ACTIVATORM8(Gearbox side) 0.6 ÷ 1.2