1036C14 CAMSHAFT IN CYLINDER HEAD - R R WITH HEAD REMOVED - Fiat - STILO - eLearn

3363578 - 1036C14 camshaft in cylinder head - r r with head removed

) 1. Undo the bolt (1a) and remove the engine oil dipstick guide pipe (1b).2. Undo the nuts (2a) and remove the exhaust manifold (2b).

1. Undo the bolts (1a) and the nut (1b) and remov the water pump rigid inlet pipe (1c) complete with gasket.2. Remove the exhaust manifold gasket.

1. Position the cylinder head (1a) in the vice using the tool (1b).

	Name	Country
1b	Support	1.860.470.000

1. Undo the bolt (1a) for the timing driven pulley, exhaust side using the tools (1b) and (1c) for anti-torque.

	Name	Country
1b	Support for counter-torque	1.860.831.000

	Name	Country
1c	Counter-torque	1.860.848.000

2. Remove the timing driven pulley, exhaust side.3. Undo the bolts (3a) for the inlet side camshaft pulley, using the tool (3b) for counter-torque.

	Name	Country
3b	Counter-torque	1.860.856.000

4. Remove the timing driven pulley, inlet side.

1. Undo the bolts (1a) and remove the camshaft caps (1b).2. Remove the upper bearing shell for the front camshaft support, inlet side.3. Remove the camshafts.4. Remove the front camshaft oil seals.5. Remove the lower bearing shell for the front camshaft support, inlet side.

Refitting ( Removing

) Place the inlet side camshaft front support lower bearing shell back in its housing.Place the camshafts back in their housings.Place the inlet side camshaft front support upper bearing shell back in its housing.Place the camshaft caps back in their housings and secure them tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT SUPPORTS	M7	Cylinder head side 1.3 ÷ 1.6

1. Fit the front camshaft oil seal, exhaust side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.824.000

1. Fit the front camshaft oil seal, inlet side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.844.000

1. Place the inlet side timing driven pulley back in its housing.2. Tighten th bolts (2a) for the inlet side timing driven pulley to the recommended torque using the tool (2b) for counter-torque.

	Fastening	Component	Ø	Value(daNm)
2a	Bolt	TIMING GEAR DRIVEN PULLEYS	M6	(Inlet/camshaft side) 0.8 - 1.0

	Name	Country
2b	Counter-torque	1.860.856.000

3. Place the exhust side timing driven pulley back in its housing.4. Tighten the bolt (4a) for the exhaust side timing driven pulley to the recommended torque using the tools (4b) and (4c) for counter-torque.

	Fastening	Component	Ø	Value(daNm)
4a	Bolt	TIMING GEAR DRIVEN PULLEYS	M12	(Exhaust camshaft side) 10.2 - 12.6

	Name	Country
4b	Support for counter-torque	1.860.831.000

	Name	Country
4c	Counter-torque	1.860.848.000

Remove the cylinder head from the vice and place the support tool back in its housing.

	Name	Country
-	Support	1.860.470.000

Place a new exhaust manifold gasket in the housing.Place the water pump rigid inlet pipe, complete with gasket, back in its housing and secure it using the nut and the bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COOLANT PUMP RIGID INLET PIPE	M6	Cylinder head side 0.8 - 1.0

	Fastening	Component	Ø	Value(daNm)
-	Nut	COOLANT PUMP RIGID INLET PIPE	M8	Cylinder head side 2.1 - 2.6

Place the exhaust manifold back in its housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8	(Cylinder head side) 2.1 ÷ 2.6

Place the guide and engine oil dipstick assembly back in its housing and fix it using the bolt.