3362472 - 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the negative battery terminal.    1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R.1. Disconnect the electrical connections from the injectors.
DescriptionConnector
1Injector    N70
2. Disconnect the electrical connection from the phase transformer solenoid.
DescriptionConnector
2Variable valve timing actuator    N76
Disconnect the electrical connectors for the engine timing sensor, engine coolant temperature sensor, engine idle actuator and throttle casing actuator.
DescriptionConnector
-Timing sensor    K47
DescriptionConnector
-Engine temperature sending unit    K36
DescriptionConnector
-Integrated throttle casing actuator    N75
Position the tool for discharging the fuel pressure in the fuel manifold.
DescriptionCode
-Rapid attachment connector1.870.684.000
1. Disconnect the fuel supply pipe from the fuel manifold.
Disconnect the electrical connections for the ignition coils.
DescriptionConnector
-Ignition coil    A30
Release the clips for the cable loom protection and place it at the side complete with the wiring.1. Undo the bolts (1a) and remove the single fuel manifold pipe (1b) with injectors (1c).
Refitting ( Removing ) Position the single fuel manifold pipe with injectors and secure it using the bolts.Position the cable loom protection complete with wiring and secure it using the clips.Connect the rapid connector for the fuel supply pipe and secure it using the band.Connect the electrical connections for the ignition coils.
DescriptionConnector
-Ignition coil    A30
Connect the electrical connectors for the engine timing sensor, engine coolant temperature sensor, engine idle actuator and throttle casing actuator.
DescriptionConnector
-Timing sensor    K47
DescriptionConnector
-Engine temperature sending unit    K36
DescriptionConnector
-Integrated throttle casing actuator    N75
Connect the electrical connection from the phase transformer solenoid.
DescriptionConnector
-Variable valve timing actuator    N76
Connect the electrical connections for the injectors.
DescriptionConnector
1Injector    N70
    1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R.Connect the negative battery terminal.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.