3362742 - 1820B58 clutch hydraulic circuit vibration damper - r+r
Removing
(
Refitting
)
Position the vehicle on the ramp - 5530B56 BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed
valve of one front brake caliperConnect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch
fluid reservoir is empty. 1. Undo the nut (1a) and disconnect the rigid pipe (1b) from the
slave cylinder from the damper.2. Pull clip (2a) back and remove the vibration damper from the
clutch pump.
Refitting
(
Removing
)
Pull the retaining clip back and fit the
vibration damper in its seat on the clutch pump. | Do not use detergents or mineral lubricants incompatible with the brake fluid materials. |