3362390 - 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.
Removing
(
Refitting
)
1. Position a beam lengthways by resting on the suspension domes.
| Description | Code | Function |
|---|
| 1 | Crossmember | 1.870.595.000 | Engine mount |
2. Position beam (2a) crossways, rest the front part (2b) on the sacrificial beam and secure the rear part to the beam positioned previously using bolt (2c).
| Description | Code | Function |
|---|
| 2a | Crossmember | 1.860.851.000 | - |
| Description | Code | Function |
|---|
| 2b | Vertical support | 1.870.748.000 | - |
3. Use a hook and a service bracket to secure the crossmember to the pressure pump mount.
1. Undo the retaining bolts.2. Disconnect the coolant recirculation pipe.3. Replace the power assisted steering fluid reservoir to one side.
1. Undo the nuts fixing the rigid support to the pressure pump mounting.2. Undo the bolts (2a) securing the mount ot the body and the bolt (2b) securing the mount to the injection control unit.3. Remove the rigid engine support, complete with flexible mounting.The flexible mounting cannot be dismantled from the rigid support.
Refitting
(
Removing
)
Fit the rigid engine support, complete with flexible mounting.Tighten the bolts securing the rigid support to the bodyshell to torque. | Value daNm | Fastening | Component | Ø |
|---|
| 5 | bolts | | M10X1.25 |
Tighten the nuts fixing the rigid mount to the pressure pump mount to torque.
| Value daNm | Fastening | Component | Ø |
|---|
| 7.5 | nuts | | M12X1.25 |
Remove the support tool positioned previously.
| Description | Code | Function |
|---|
| - | Crossmember | 1.860.851.000 | - |
| Description | Code | Function |
|---|
| - | Vertical support | 1.870.748.000 | - |
| Description | Code | Function |
|---|
| - | Crossmember | 1.870.595.000 | Engine mount |
Fit the power steering fluid reservoirConnect the coolant recirculation pipe to the engine.Tighten the engine coolant reservoir fixing bolts.
