1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONING - Fiat - STILO - eLearn

3362426 - 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONING

) 1016A10 COPERCHIO INSONORIZZANTE - S.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 7055B42 PASSARUOTA supplementare ANTERIORE (uno), sx o dx - S.R. 1092G10 CINGHIA unica comando organi motore - S.R. Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R1. Act on the bolt fixing the drive pulley and rotate the crankshaft until the timing references are aligned (cylinder 1 at T.D.C.).

1. Loosen the nut retaining the timing belt mobile tensioner.2. Remove the toothed timing belt.

Refitting ( Removing

) 1. Remove the engine oil pump fixing bolt.2. Fit the timing belt on the crankshaft gear.3. Fit the pin for the tool for positioning the engine at T.D.C.

	Description	Code
3	Template	1.860.905.000

4. Rotate the crankshaft using small movements to allow the pulley locating dowel (4a) to enter the opening in the tool (4b).5. Lock the tool in position using a nut (5a) and service bolt (5b).

1. Rotate the toothed pulley until the timing references are aligned.2. Complete the fitting of the timing belt following the order illustrated.3. Adjusting the semi-automatic tensioning device, place the tensioner pointer (3a) in the maximum tension position, then lock the fixing nut (3b).Remove the tool for T.D.C.

	Description	Code
-	Template	1.860.905.000

Rotate the crankshaft throught two revolutions in its normal direction of rotation.4. Loosen the nut fixing the tensioner and, working carefully, position the tensioner (4a) reference in line with the reference opening (4b), then tighten the nut (4c) fixing the belt tensioner to torque.

	Fastening	Component	Ø	Value(daNm)
4c	Nut	MOBILE TIMING TENSIONER	M8	2.5

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING 1092G10 CINGHIA unica comando organi motore - S.R. 7055B42 PASSARUOTA supplementare ANTERIORE (uno), sx o dx - S.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R 1016A10 COPERCHIO INSONORIZZANTE - S.R.